Anmol Chemicals is the pioneer manufacturers of Iron Sulphide or Ferrous Sulfide, Pharmaceutical Excipients Fragrance & Flavor chemicals in India. We offer Halal and Kosher Iron Sulphide made in an ISO9001, ISO22000 (FSSC22000), cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Ferrous Sulfide is in these pages.
The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Home ----------------- Contact

Drum Packing Palletized Drum Packing 25-50kg or 55lbs bags. Paletized and Shrink Wrapped. Exports to USA UAE Europe South Africa Tanzania Kenya Egypt Uganda Turkey Brazil Chile Argentina Dubai. Jumbo Bag Packing Iron Sulphide Manufacturers Ferrous Sulfide Manufacturers

Iron Sulphide Ferrous Sulfide SDS GHS, MSDS Sheet

Ferrous Sulfide, Iron Sulfide Specifications

Iron Sulphide SDS GHS, MSDS Sheet Ferrous Sulfide Material Safety Data Sheet

Section 1 - Chemical Product and Identification

MSDS Name: Iron Sulphide
Synonyms: Ferrous sulfide

Section 2 - Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Labeling according GHS & Regulation (EC) No 1272/2008

GHS Label Elements
NONE

Signal Word: None

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

OSHA Hazards: No known OSHA hazards.

Section 3 - Composition, Information on Ingredients

Chemical Name: Iron Sulphide or Ferrous Sulfide
CAS#: 1317-37-9
EC code EINECS/ELINCS: 215-268-6.
Percent: 100

Section 4 - First Aid Measures

Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin: Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician: Treat symptomatically and supportively.
Antidote: None reported.

Section 5 - Fire Fighting Measures

General Information: For Ferrous sulfide, as in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media: For small fires over Iron Sulphide, use water spray, dry chemical, carbon dioxide or chemical foam.
Flash Point: Not applicable.
Auto ignition Temperature: Not applicable.
Explosion Limits, Lower: Not available.
Upper: Not available.
NFPA (Perceived) Health: 0; Flammability: 0; Instability: 0

Section 6 - Accidental Release Measures

General Information: Use proper personal protective equipment.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions.

Section 7 - Handling and Storage

Handling: Use Ferrous sulfide with adequate ventilation. Avoid contact with skin and eyes. Avoid ingestion and inhalation.
Storage: Store Iron Sulphide in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - Exposure Controls, Personal Protection

Engineering Controls: For Iron Sulphide or Ferrous sulfide use adequate ventilation to keep airborne concentrations low.
Exposure Limits

WEL: Short-term value: 2 mg/m³
Long-term value: 1 mg/m³ as Fe
ACGIH: 1 mg/m3 TWA (as Fe) (listed under Iron salts (soluble)
NIOSH: 1 mg/m3 TWA (as Fe) (listed under Iron salts (soluble)
OSHA - Final PELs: None listed

OSHA Vacated PELs: Iron (II) Sulfide: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - Physical and Chemical Properties

Physical State: Solid
Appearance: Iron Sulphide or Ferrous sulfide is gray to brown black
Odor: None reported
pH: Not available.
Vapor Pressure: Not applicable.
Vapor Density: Not available.
Evaporation Rate: Not applicable.
Viscosity: Not applicable.
Boiling Point: Decomposes.
Freezing/Melting Point: 1194 deg C
Decomposition Temperature:
Not available.
Solubility: It is insoluble in water.
Specific Gravity/Density: 2 gm/cm³
Molecular Formula: FeS
Molecular Weight: 87.907

Section 10 - Stability and Reactivity

Chemical Stability: Iron Sulphide or Ferrous sulfide is stable under normal temperatures and pressures.
Conditions to Avoid: Moisture, exposure to air, strong oxidants.
Incompatibilities with Other Materials: Strong acids.
Hazardous Decomposition Products: Oxides of sulfur, hydrogen sulfide.
Hazardous Polymerization: Has not been reported for Iron Sulphide or Ferrous sulfide.

Section 11 - Toxicological Information

RTECS#: CAS# 1317-37-9 unlisted.
LD50 Oral - Rat - female: > 2.000 mg/kg
LD50 Dermal - Rat - male and female: > 2.000 mg/kg
Carcinogenicity: CAS# 1317-37-9: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
Epidemiology: No data available.
Teratogenic: No data available.
Reproductive Effects: No data available.
Mutagenic: No data available.

Section 12 - Ecological Information

LC50-Gambusia affinis (Mosquito fish): > 10.000 mg/l – 96.0 h

This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Section 13 - Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 - Transport Information

DOT: Not regulated
TDG: Not regulated
IATA: Not regulated
IMDG/IMO: Not regulated

Section 15 - Regulatory Information

USA:
TSCA: CAS# 1317-37-9 is listed on the TSCA inventory.
SARA Section 302 Extremely Hazardous Substances: None of the chemicals in this product have a TPQ.
Section 313: No chemicals are reportable under Section 313.
MASSACHUSETTS RIGHT TO KNOW COMPONENETS: No components are subject to the Massachusetts Right to Know Act.
PENNSYLVANIA RIGHT TO KNOW COMPONENTS: Iron sulphide
NEW JERSEY RIGHT TO KNOW COMPONENTS: Iron sulphide
CALIFORNIA PROP. 65 COMPONENTS: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Canadian WHMIS Classifications: -

HMIS (Perceived): Health Hazard: 0, Fire Hazard: 0, Reactivity: 0
NFPA (Perceived): Health: 0, Flammability: 0, Reactivity: 0

EC code EINECS/ELINCS: 215-268-6.

Section 16 - Additional Information

Disclaimer:
*********************************
Our company provides this SDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Iron Sulfide or Ferrous Sulphide Sulfide SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
*********************************

Ferrous Sulfide Iron Sulphide manufacturers at:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Manufacturers India

Exports to USA, Canada, UAE, Dubai, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, etc.

Ferrous Iron Sulfide Sulphide Manufacturers